Triplett Fox 2 & Hound 3 Probe Kit
Triplett's Fox & Hound Series test kits can tone and trace just about any wiring you can find. Use the Fox 2 & Hound 3 Probe Kit to identify, locate, and trace wires, cables, and other conductors.
The Fox 2 toner sends a signal through your wire or cable. Then the Hound 3 tracer helps you locate the wire, even behind drywall, wood, or plastic. Follow it all the way to the other end. Then you can make appropriate attachments or label the wire for future use.
The Fox 2 & Hound 3 is an excellent choice for installation technicians who are completing work on telephone, electrical, security, or audio/video projects where no wiring plans exist. The Fox & Hound makes quick work out of determining which wire out of the bundle feeds what location. No more trial and error connections.
We make buying easy with discounts, upgraded shipping, and price matching on most purchases.
Features
- Battery operated
- Lightweight
Specifications
Kit Includes:
- Fox 2 Deluxe Tone Generator
- Hound 3 Probe Inductive Tracer
- Carrying Case
Manuals and Brochures
Manual Information Examples
... YEAR LIMITED WARRANTY
The
Triplett Corporation warrants
instruments and test equipment manufactured by it to be free ...a claim under the provisions of this warranty, return the
instrument or
test equipment to
Triplett Corporation, Service Department, ...
... a power circuit, possibly causing
equipment damage
and user injury, use of the conductive plastic
probe is recommended. The plastic
probe is only slightly conductive,
and usually causes no disruption of
equipment operation. An ...
Lights will be bright,
and the HOUND 3's
Speaker (LL) will produce a loud, strong, signal from the FOX 2. As the
battery is ... as loud in the HOUND 3's
Speaker. When the Lights begin to dim, the
battery should be replaced. 7.3: A Few Basic
Tests Turn ...
... a premium FOX 2 Tone
Generator (Toner)
and a newly designed HOUND 3 Inductive
Amplifier (
Probe). The FOX 2 is a
battery operated handheld lightweight multi-function Toner that
generates multiple tones, performs some ...
... a high voltage potential. 4.15 The HOUND 3's metal
probe can accidentally short out a circuit that is being
tested. Use care when
testing live circuitry, or an accidental short may result in
equipment damage or user injury.
8
sible for the
battery to
test OK,
and for the TRACER TONE mode to
work, but for the AUDIBLE CONT mode not ...near the Earphone Jack (GG) first,
and snapping the opposite end of the Cover to the case. 7.2.2:
Testing the
battery in the HOUND 3 The
battery...
...,
and connect the talksets as shown in Figure 3.
CORDLESS INTERFACE
TRIPLETT
UNLOCK
VISUAL CONT. TALK
BATTERY TEST
WARBLE
AUDIBLE CONT. PULSE TRACER TONE OFF / POLARITY
AC / RING REV NORM
...
... verified by the cadence change. Cordless Interface
CORDLESS INTERFACE
TRIPLETT
UNLOCK
VISUAL CONT. TALK
BATTERY TEST
WARBLE
AUDIBLE CONT. PULSE TRACER TONE OFF / POLARITY
AC / RING REV ...
...a unique latch
testing technique using "TrueTrace" for
testing Alarm Sensors • Overload
Protected - 120VAC Line Cross
Protection • Overload ...hazards • Warble/Pulse Tracer Tone - Selectable tone for audible &
visual ID using Hound 2 or Hound 3
Probes 3
..., Warble/Continuous Tracer Tone, On/Off
Audio Pilot Tone, On/Off Cadence Shift • Tone/
Battery LED - indicates that Tracer Tone is on
and battery is OK •
Audio Pilot Tone - confirms the Tracer Toner signal •
Visual & Audible Continuity
Test • Red/...
5.2: HOUND 3 Specifications 5.2.1:
Amplifier High impedance bootstrapped FET input for high
gain and sensitivity. Incorporates a ... 1-1/2" mylar coned
speaker with high strength alnico magnet is rugged
and moisture resistant. 5.2.4:
Probes (2 provided)...
... Fox 2
and Hound 3 Control
Locations (See Figures 1
and 2)
A
CORDLESS INTERFACE
F G
TRIPLETT
B C D E
UNLOCK
VISUAL CONT. TALK
BATTERY TEST
H I
WARBLE
AUDIBLE CONT. PULSE TRACER TONE OFF / POLARITY
...
...coming from the HOUND 3's
speaker when it is in an area with fluorescent lights, neon signs, transformers, etc. In fact, an easy
test to verify the HOUND 3 is
working is to move it toward an operating fluorescent light
and note that the ...
To
test polarity using the clip
leads, connect the red clip to the Ring wire,
and the green
lead to the...condition on most phone systems, which will allow the system to
generate a ring signal. With the FOX 2
set to OFF / POLARITY, connect the RJ-11 or ...
...mode (either AUDIBLE CONT or
VISUAL CONT / TALK)
and then connect the clip
leads to the circuit to be
tested. If there ... if the clip
leads are connected to the circuit to be
tested before the FOX 2's switch is
set to the AUDIBLE CONT or
VISUAL CONT / ...
...power button depressed, grab the suspect wires,
and selectively short out the wires, looking... shorting out wires, turns on the handset
and setting it to maximum volume. He can then
set the handset down,
and using both hands, begin selectively shorting...
CORDLESS INTERFACE
TRIPLETT
UNLOCK
VISUAL CONT. TALK
BATTERY TEST
WARBLE
AUDIBLE CONT. PULSE TRACER TONE OFF / POLARITY
AC / RING REV NORM
OVERLOAD
PROTECTED
Figure 5 Floating or Line-to-Line Tracing In the ...
.... The extension wire can be hundreds of feet long if necessary. To
test a fake ground to see if it can be used for ... tone. 8.1.9.2: Telephone Wires: The floating method is usually used to
locate a pair of wires in a telephone junction block. If the ...
... ground has not been used).
STRONG TONE
OPEN FAULT WEAK TONE
CORDLESS INTERFACE
TRIPLETT
UNLOCK
VISUAL CONT. TALK
BATTERY TEST
WARBLE
AUDIBLE CONT. PULSE TRACER TONE OFF / POLARITY
AC / RING REV...
... provided RJ-45 to RJ-11 Adapter to trace or
test polarity of telephone wires terminated into a ... RJ-11 into the jack,
and then connect either the red or green clip
lead to a ground or fake ground. This will boost the tracer tone,
and may provide an ...
... a 600
Ohm load (terminated telephone line) Frequencies: 4 frequencies
located between 600Hz
and 2000Hz, depending on user
setting Types: Warble, Continuous, Pulse
Audio: Low level pilot tone verifies ...
