Panamax M5400-PM

Voltage Regulation

Improve system performance and prolong equipment life by providing a consistent level of optimal power to your equipment.

Improves Picture and Sound Quality

Level 4+ Power Cleaning and Filtration eliminates common symptoms of contaminated power (including loss of detail, pops, hisses, hums and visual artifacts) and allows your A/V equipment to perform up to its full capability.

Monitors Incoming Line Voltage and Provides a Visual Indication of Power Level

Panamax’s patent pending AVM™ circuitry continuously monitors the incoming power as displayed on the digital voltmeter. In case of an undervoltage or an overvoltage, a flashing lightning bolt will be displayed in red in the voltmeter, and power to the connected equipment is automatically turned off if either of these conditions is detected. When voltage returns to a safe level, power to the equipment is automatically reconnected.

Reduces Cross-Contamination Between Components

The M5400-PM is designed to provide noise isolation between 5 isolated outlet banks including 2 high current outlets so that any noise created by an A/V component can not contaminate the power going to equipment plugged into another outlet bank.

Seen this for product for less? Inquire now to see if we can beat the lowest price by 10%. When you buy from us, you can be confident that we will take care of you and that you are purchasing from an authorized dealer who's been in the business for more than 10 years.

Features

• Clean Power Level 4+ Panamax PM family’s highest level of power filtration plus voltage regulation ensure components receive a consistent level of clean power. Improves picture and sound quality by eliminating noise across the entire AC bandwidth.
• Voltage Regulation Improve system performance and prolong equipment life by providing a consistent level of optimal power to your equipment.
• AVM (Automatic Voltage Monitoring) Protects equipment against prolonged over/under voltages by disconnecting the power and reconnecting it when safe power returns.
• High Current Outlets 2 outlets for equipment with high power demands (Amps/Subwoofers).
• USB Charger Convenience charger for mp3 players, cell phones, and other small electronics.
• Gaming LAN Port Easy access to LAN port on front panel. Perfect for online gaming.
• 5 Isolated Outlet Banks Isolating outlet banks from one another prevents noise contamination between components.
• 12 Volt Trigger Allows source equipment to activate or deactivate the outlets on the M5400-PM.
• Power Sequencing Guards against blown fuses and potentially damaging speaker thump by automatically powering outlets on and off in sequence.
• 11 Outlets 5 Always On, 4 Switched, 2 Switched High Current.

Specifications

• AC Power UL1449 Suppression Rating 330V Thermal Fusing Yes Protection Modes L-N, L-G, N-G Peak Impulse Current 72,000 A Maximum Current Rating 15 A Line Voltage 120V, 60Hz Initial Clamping Level 200V Energy Dissipation 2125 Joules Catastrophic Surge Circuit Yes Auto-Resetting Under-voltage shutoff 86V ± 6V Auto-Resetting Over-voltage shutoff 142 VAC ± 8 VAC
• EMI/RFI Noise Filtration Banks 1, 2, 3, 4 80 db, 100 KHz − 2 MHz Bank 5, High Current Outlets 60 db, 100 KHz − 2 MHz
• Voltage Regulation (Banks 1-4) Power / Current 1500 VA / 12A Output Voltage Range 120 VAC ± 6 VAC Input Voltage Range 100-136 VAC Buck Stage reduces voltage in the 125-136 V range Boost Stage 2 boosts voltage in the 100-109 V range Boost Stage 1 boosts voltage in the 109-119 V range
• DC Trigger Input Voltage and Polarity 3 - 24V DC, Bidirectional Jacks 3.5mm (1/8" mono mini-plug) Current Requirement 4.6 mA @3V, 58 mA @24V
• DC Trigger Output Positive = Tip, Negative = Ring Pass through no delay
• LAN Circuits Wires Protected 8-Wires Connectors RJ-45 Compatibility 10/100bT Clamping Level 52V
• USB Circuit Power Delivery 500 mA @ 5VDC Jacks USB-A
• Telco Protection Wires Protected 2-Wire, Pins 4 & 5 Suppression Modes Metallic & Longitudinal Fuseless/Auto-resetting Yes Connectors RJ-11 Clamping Level 260V Capacitance 30pf (approx.)
• Universal Coax Protection Shielded Yes Insertion Loss < 0.5 dB HD 1080 i/p Ready Yes Frequency Range 0 MHz - 2.2 GHz Connections Female "F", Gold Plated Clamping Level 75V Bidirectional Yes