Cool Components TC-AC
This unit has a host of features that makes it one of the most advanced temperature control devices on the market. The microprocessor-based design provides for enhanced monitoring and control of system temperature. The various modes makes it perfect for different applications which require different set points and different levels of fans control.
This unit provides automated on and off control as well as variable speed control based on temperature. So as the temperature rises, the fans turn on and speed up as the temp rises. Then as the system cools down, the fans slow down and ultimately turn off when the temperature drops below the setpoint which is determined by the different modes.
Buying from an authorized dealer has many benefits such as valid warranty coverage on your purchase and peace of mind.
Read More >>>
Features
- Compatible with all Cool Components Cooling & Venting Products
- Polarity Proteced
- On/Off Control Based on Temperature
- Alarm to Protect Against Accidental Disconnect from Fans
Specifications
Operating Modes
- Modes are easily changed by pressing the programming button and listening for the beeps - 1 beep indicates that the system is in mode 1, 2 beeps/mode 2, etc.
- Mode 1 features On/Off at roughly 900F and varies the fan speed based on Temperature with max speed achieved around 1100F.
- Mode 2 simply has a lower ‘on/off’ temperature at roughly 850F.
- Mode 3 is for more aggressive applications as the max speed is achieved more rapidly with full speed at 95-980F. On/off temp is set at approximately 850F. This mode should only be used when most aggressive cooling is a necessity. Modes 4 is not used.
- *** These are all fixed set points and cannot be changed ***
General Specifications
- Dimensions: 2 1/4” x 3 1/2” x 1”
- Construction on Housing: PVC w/ Textured Finish (Black)
- Compatibility: All Products
Power Specifications
- Connection: 2-Pin FastWire Power System (Ensure proper polarity - Tip to +)
- Voltage: 12 VDC (Must be Operated at 12V)
About Cool Components
Cool Components is located in Tampa, Florida, and has been offering cooling solutions for over 5 years. Our primary focus is to offer top-quality products at reasonable prices. We have also established a solid reputation with our customers by not only offering quality products but also providing support that is second to none.
Background
The installation and setup of today's audio video systems poses many challenges to owners of AV equipment and professional installation companies alike. We know this because our background is in the sales, installation, and support of consumer electronics and in particular the custom Audio Video and Residential Technology fields. Our experience and expertise both inspires and facilitates the development of quality products and services designed to fill a void in the current marketplace.
Primary Focus: Cooling Products
View all Cool Components items
Learn More
Additional Considerations for Temperature Controllers
This section features optional controllers for our fan systems. There are several options in relation to the running of fans. The first option is leave the fans running full time. The second option is to switch the fans from the equipment (from a switched outlet on a receiver, amp, or other components). Those two options do not require purchasing any additional equipment. The next options involve adding a controller into the cooling system. The more basic controller option is to use the Basic Controllers which simply turn the fans on and off based on temperature. The next option is to use the Advanced Controller which provides on and off control as well as variable speed control both based on temperature.
Best Practices. There are several principles when considering the different options for powering the units. The first is to consider when components require additional airflow. Some components such as cable and satellite receivers generate heat in both the on and off modes. This is simply because the receivers are continually downloading menus and are simply ‘on’ all of the time. Then other components generate heat only while on and others only when being ‘driven’ – played loudly…
For always on components, cooling products can and probably should be run full time with those units. Since the rest of the system is off, this heat most likely will not cause any damage but the fans could be run full time just to keep the heat in check. Then switching products from the component they are on is a great control option that comes with no additional costs. Nowadays, more and more receivers do not have switched outlets but if you do have a switched outlet, strongly consider switching the cooling products from that outlet. A tip is to use a ‘lamp cord’ to plug into the amplifier or receiver and then plug the power supplies into the other end of the lamp cord. This just keeps the bulky power supply off the back of the receiver.
Another option for the ‘always on’ components and most other situations is to use the Basic Controllers. When the heat rises to the set point (80 or 88 degrees F), the fans turn on. Then when the temperature goes below those points, the fans turn off. This simply ensure that the fans are only running when necessary. Our fans are very high quality and are rated for at least 50,000 hours of operation but it is not a bad idea to only run them when necessary. For the different set points, use the 80 degree unit when measuring the temperature in a closet and the 88 degree unit when measuring the temperature close to components. When then measuring around the components, you can further manipulate the on/off point simply by moving the sensor closer or further from the components – either directly on a component or on the back of the cabinet or shelving (further from the components).
Then the most extreme option is to use the Advanced Controller which again, turns fans both on and off but also varies the speed of the fans as the temperature changes. As the heat increases, the fans spin faster…. The benefit to this unit is that it does provide a greater level of protection of components. It allows the fans to cool at a minimum speed for the most quiet operation when heat is at lower levels but then as things heat up, the controller speeds up the fans automatically which provides maximum protection.
Common Issues & Misconceptions Related to Temperature Control. There are a few misconceptions when it comes to control options so take it from the pros who are most concerned that your systems run effectively and do not have a desire to sell you features or options that you do not need.
1) You Must Have Temperature Control. As you have already read, there are control options that do not require added equipment or expense. Because these options exist and are completely valid, why have built-in control? As with most things, it is best to keep things simple and only add features and options if required. With our controllers, simply plug them inline between the fan units and power supplies for advanced control.
2) More Control is Better. It may be enticing to simply order the Advanced Controller and have the highest level of control and protection but such protection is not always necessary. Many components are very easily cooled and just by switching them from the equipment will solve heat problems in most cases. In other situations, simply turning the fans on and off using a Basic Controller is effective both in cost and functionality. All of our cooling and venting products have been tested at quiet settings so by setting the units to be quiet and then adding in a controller, you should have an effective solution.
Manuals and Brochures
Manual Information Examples
...
TC-
AC
www.coolcomponents.com
This
unit has a host of features that make it one of the most advanced
temperature control devices on the market. Its microprocessor-based
design provides for enhanced monitoring
and control of
system...
Cool Components TC-AC Reviews
Post your own Cool Components TC-AC review!
We have not received any reviews for this item yet.
Be the first to add a review!
