Atlona AT-PA100
Atlona's AT-PA100 is a mini-sized Class-D stereo/mono audio amplifier. It may be compact, but it is full-featured. It has built-in EQ control, so you can adjust bass and treble and mix in a MIC signal.
The AT-PA100 also has built-in RS232 control, which is perfect for 3rd party control or automation systems are being used.
Multiple units can be looped together to power multiple zones.
Seen this for product for less? Inquire now to see if we can beat the lowest price by 10%. When you buy from us, you can be confident that we will take care of you and that you are purchasing from an authorized dealer who's been in the business for more than 10 years.
Features
- Commercial Class-D Stereo/Mono Audio Amplifier
- 2x20Watt at 4ohm or 1x40Watt at 8ohm
- Microphone mixer function: the microphone can be mixed with line audio output, and separately controllable
- Two stereo audio inputs and one microphone input, switchable by front panel buttons or RS232
- Volume/Bass/Treble controllable by front panel buttons or RS232
- Line audio output, with volume control
- LED indicator for power and input status
Specifications
Technical Specifications:
- Audio Input
- Input: 2 x Stereo Audio, 1 x MIC
- Input Connector: 2 x RCA, 1 x 3.5mm, 1 x 6.5mm (MIC)
- Input Impedance: >10Kohm
- Audio Output
- Output: 1 Amplifier, 1 Stereo Audio
- Output Connector: 1x3.5mm jack, 1x4-pole Phoenix connector
- Output Impedance: 50ohm/stereo, 4~8ohm/amplifier
- Audio General
- Frequency Response: 20Hz ~ 20KHz
- SNR 80dB at maximum output
- CMRR: >70dB@20Hz~20KHz
- Bandwidth: 20Hz ~ 25KHz
- Power Output: 20 Watts x 2 (4 Ohms)
- Other
- Serial Control Port: RS-232, 9-pin female connector
- Power Supply: 24V (universal 110/240V)
- Optional IR Remote Control: AT-PA1-IR
Manuals and Brochures
Manual Information Examples

...
product is lost or stolen
and helps ensure you'll receive notification of performance issues
and firmware updates. At
Atlona, we respect
and protect your privacy
and assure you that your registration information is ...

...has a dual-mono mode. This mode sends the same L/R
audio signal to both channels (
speakers).
Switching to the "MONO"
Positive and negative per channel (2
cables total)
PUSH-BUTTON CONTROLS
The PA100 has push...

...-Parity bit: none
Command
1A1. 2A1. 0A0. 0A1.
Function Description
Switching audio input to input...code, which is the changeable. 2: The bracket [ ] is not included in the
RS232 commands. Example 1:
Switching the input 2 to the line-out should be...

...
and input status.
SIDE VIEW:
INPUTS/OUTPUTS:
• Inputs: 2 x Stereo
Audio, 1 x Mic • Outputs: 1 x
Amplifier, 1 x stereo
audio
SPECIFICATIONS:
• Input
Connector: 2 x
RCA, 1 x 3.5mm, 1 x 6.5mm (Mic) • Input Impedance: >10K?...

... mode: 2x20Watt@4?
The PA100's default output of the
amplifier is 2x20Watt@4?.
2x20Watt@4?
Switching to the "STEREO"
Positive and negative per channel (2
cables total)
4.2. Bridge mode: 1x40Watt@8?
The ...

... plug. Doing so will void the
warranty and safety
features. This equipment should be
installed near the socket outlet
and ...-PA100. Opening the
product will void the
warranty. Do not attempt to service the unit. Instead disconnect it
and contact your ...

...
and input status.
SIDE VIEW:
INPUTS/OUTPUTS:
• Inputs: 2 x Stereo
Audio, 1 x Mic • Outputs: 1 x
Amplifier, 1 x stereo
audio
SPECIFICATIONS:
• Input
Connector: 2 x
RCA, 1 x 3.5mm, 1 x 6.5mm (Mic) • Input Impedance: >10K?...

CONNECTION DIAGRAM
Looping connection
1x40Watt@8Ohm
2x20Watt@4Ohm
DVD PC
www.
atlona.com | toll free: 1-877-536-3976 For International: 1-408-962-0515

User Manual
AtlonA
Stereo/Mono
Audio Amplifier with 3 Inputs (2 x Stereo, 1 x MIC) AT-PA100
www.
atlona.com | toll free: 1-877-536-3976 For International: 1-408-962-0515

TABLE OF CONTENTS
1. Introduction ... 3 2.
Features ... 3 3.
Specification ... 3 4.
Audio Connection ... 4 4.1. Default mode ... 4 4.2. Bridge mode ... 4 4.3. Dual-mono mode ... 5 5. Push-Button Controls ... 5...

... AC, 50/60Hz) for worldwide compatibility.
SPECIFICATIONS:
Audio Input
Input Input
Connector Input Impedance Frequency Response ...THD + Noise Power Output 1 x
Amplifier, 1 x stereo
audio 1 x 3.5mm
jack, 1 x Phoenix
connector, 4 pole 50?/stereo, 4~8?/...

CONNECTION DIAGRAM
Looping* connection
1x40Watt@8?
2x20Watt@4?
* The "loop" out port allows a source to pass-through to another device.
DVD PC
www.
atlona.com | toll free: 1-877-536-3976 For International: 1-408-962-0515
7

... year, whichever is longer. 3. NO OTHER
WARRANTIES TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW,
ATLONA TECHNOLOGIES AND ITS SUPPLIERS DISCLAIM ALL OTHER
WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING,...

CONNECTION DIAGRAM
Looping connection
1x40Watt@8Ohm
2x20Watt@4Ohm
DVD PC
www.
atlona.com | toll free: 1-877-536-3976 For International: 1-408-962-0515
Atlona AT-PA100 Reviews
Post your own Atlona AT-PA100 review!
We have not received any reviews for this item yet.
Be the first to add a review!